MT6580__AG9__P10__AG9__7.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29
Android Info :
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : AG9
Device Model : AG9
Device CPU : MT6580
Device IntName : AG9
Device Version : 7.0
Device Compile : 1/27/2018 7:53:14 AM
Device Project : alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29
Device ExtInfo : P10
DOWNLOAD LINK
নামাজ বেহেস্তের চাবি
alcatel 2003D spd 6531ecpu 100% ok flash file without password
information
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]
IMEI[1] : 357908094271551
IMEI[2] : 357908094271569
Done!
Elapsed: 00:00:12
Reconnect Power/Cable!
WINSTAR W903 6531E SPD CPU 100% FLASH FILE WITHOUT PASSWORD
INFORMATION:
Card found : 20721776 , v0154
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07
SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Identify [ v1.07 ]
BootMode : FLASH
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
ERROR : Protocol HandShake failed!
Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Identify [ v1.07 ]
BootMode : FLASH
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
ERROR : Protocol HandShake failed!
Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Identify [ v1.07 ]
BootMode : FLASH
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
ERROR : Protocol HandShake failed!
Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Identify [ v1.07 ]
BootMode : FLASH
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]
IMEI[1] : 355533---------
IMEI[2] : 355533---------
Done!
Elapsed: 00:00:10
Reconnect Power/Cable!
নামাজ বেহেস্তের চাবি
HIMAX H-909 SPD 6531E CPU 100% FLASH FILE WITHOUT PASSWORD
MOCOR_16A.SE8390AC_BY_S023_A_HIMAX_F2_V06_T01_20200825_Release
INFORMATION
Card found : 20721776 , v0154
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07
SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Identify [ v1.07 ]
BootMode : FLASH
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
ERROR : Protocol HandShake failed!
Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Identify [ v1.07 ]
BootMode : FLASH
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
ERROR : Protocol HandShake failed!
Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
0peration : Format FileSystem [ v1.07 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]
Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_0990933A4469_NVM.nv
Executing FormatFFS ...
Format FFS Done!
Done!
Elapsed: 00:00:14
Reconnect Power/Cable!
Operation : Read Flash [ v1.07 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]
Read Flash Ok, Size : 4.00 MiB
Platform Version: MOCOR_16A.SE8390AC_BY_S023_A_HIMAX_F2_V06_T01_20200825_Release
Project Version: SC6531EFM_BAR
MMI Version: SC6531EFM_BAR
BASE Version: BASE_SVN
HW Version: SC6531EFM_BAR
08-25-2020 18:45:52
LOG Version: V1.0.1
Saved to : C:\Users\sc\Desktop\HIMAX H-909 SPD 6531E\MOCOR_16A.SE8390AC_BY_S023_A_HIMAX_F2_V06_T01_20200825_Release.bi
Done!
Elapsed: 00:00:59
Reconnect Power/Cable!
নামাজ বেহেস্তের চাবি
itel it5260 6531e FLASH FILE 100% OK WITHOUT PASSWORD
INFORMATION
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
ERROR : FDL NOT started!
Error : Loader send failed!
Wrong model selected! Select correct one!
Reconnect Power/Cable!
SPRD mode : SC6531 : REV : C000 : NOR : [ 4MB-8MB ]
Operation : Identify [ v1.07 ]
BootMode : FLASH
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q64 : 0x00800000 [ 8MiB ]
IMEI[1] : 355226---------
IMEI[2] : 355226---------
Done!
Elapsed: 00:00:14
Reconnect Power/Cable!
FF257M82_M20_LHTT_WALTON_ML19_D240_V10_240X320_EN_BE_20200306_150100
INFORMATION
Card found : 20721776 , v0154
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07
SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Identify [ v1.07 ]
BootMode : FLASH
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]
IMEI[1] : 3593601---------
IMEI[2] : 3593601--------
Done!
Elapsed: 00:00:20
Reconnect Power/Cable!
Symphony i95 SPD IC Hang Logo Fastboot Fix Firmware 100% ok flash file without password
Symphony_i95_SC9832E_HW1_V7_16012019_SPD
Symphony_i95_SC9832E_HW1_V7_16012019_SPD
LAVA 702 FLASH FILE S110+S114 SARPOT 100%OK MTK 6580 CPU WITHOUT PASSWORD
लावा आईरिस ७०२ फ़्लैश फाइल मटक छपु ६५८० १००% ओके विथाउट पासवर्ड
INFORMATION
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Lava
Device Model : iris702
Device CPU : MT6580
Device IntName : iris702
Device Version : 6.0
Device Compile : 8/14/2017 11:38:20 AM
Device Project : alps-mp-m0.mp1-V2.34_lava6580.weg.m_P30
Device ExtInfo : iris702
ITEL P32 MTK CPU FLASH FILE 100% OK WITHOUT PASSWORD
िटेल ०३२ मटक छपु फ़्लैश फाइल १००% ओके विथाउट पासवर्ड
S/N: 20721776 v0154
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.38c9
Backup files: C:\InfinityBox\CM2MT2\backup\
Backup files: 1 dirs: 0
Build device list...
Init environment...
Load IDBase v312457 Ok
Check for updates...
Installed v2.38 Latest v2.42 Required card v0154
Infinity Chinese Miracle-2 #CM2MT2 v2.42
Required firmware v0154
Wrong Username or Password - set it at [Settings] to get server access
Operation: Identify Device [ v2.38c9 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
PORT: BOTH [ B + P ]
[+] Read Deep info: PRL, HW, DEBUG
[+] AutoEMI
[+] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[-] Local SLA
[-] Force BROM
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
MODE: PRELOADER PORT; PORT: 4
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM: Init passed
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
BROM: Sec Level: 0x00000000 Mode: PLAIN
BROM: BROM|BL : 0xFF|0x01 [PRELOADER PORT]
AGENT: 0_base: base_v2216 | Manual: Off
[3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6580
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA: AGENT started
NAND: DEVICE NOT FOUND
eMMC: OK
eMMC: 460001154D32364E05820342394518D3
DAInf: v4.2.156
DA: DRAM ready
DA: BOOT to 2nd DA...
DA: Receiving HW info
EMMC:
CID: 150100464E36324D42038205D3184539
VEN: Samsung OEM: 0 ID: 464E36324D42 [FN62MB] PRV: 0x03
SNN: 2181419800 [0x8205D318] MF: 4/2018
BOOT1: 0x00400000 [ 4.00 MB ]
BOOT2: 0x00400000 [ 4.00 MB ]
RPMB: 0x00080000 [ 512.00 KB ]
USER: 0x1D2000000 [ 7.28 GB ]
SRAM 0x00020000 [ 128.00 KB ]
DRAM 0x40000000 [ 1.00 GB ]
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
RNID: 9FD776387995075645E2367D02C2628B
DA: STATUS: BLANK FLASH; BSTYLE: EMMC FLASH BOOT
DA: USB: HIGH-SPEED
Boot done [0]
Reading...
Ok
Reading...
Scan memory...
Found region: 15640 [12|15640|0]
Scan filesystem...
Patch Level: O11019
SW Version: P32-F8011-8.1-OP-V054-20200330
Ver. CodeName: REL
Ver. Release: 8.1.0
Sec. Patch: 2020-04-05
Build Time: 30.03.2020
Product Model: itel P32
Product Brand: Itel
Product Name: F8011
Product Device: itel-P32
CPU : armeabi-v7a,armeabi
Product Manfct: itel
Product Info: P32
SW : P32-user 8.1.0 O11019 1585556127 release-keys
Product Board: P32
Board Platform: mt6580
Display ID: P32-F8011-8.1-OP-V054-20200330
Startegy: 7
Firmware ID: MT6580_itel_itel_P32_8.1.0_P32-F8011-8.1-OP-V054-20200330_O11019_P32
Verify firmware [MT6580_itel_itel_P32_8.1.0_P32-F8011-8.1-OP-V054-20200330_O11019_P32]...
Exist
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
NVRAM: Items: 0x77 Size: 0x02974A State: Ok
WiFi MAC: AA0037003600
BlTh MAC: 8050F6F1CFEF
IMEI[1]: 356370090233120
IMEI[2]: 356370090233138
Verify device config...
Ok
Loaders Ok
Backup [20] to C:\InfinityBox\CM2MT2\backup\MT6580__9FD776387995075645E2367D02C2628B\
[3] Read: NVRAM
[20] Read: NVDATA
[2] Read: PROINFO
[8] Read: LK
[4] Read: PROTECT1
[6] Read: PERSIST
[0] Read: PRELOADER
Done 7 files
Compress: C:\InfinityBox\CM2MT2\backup\MT6580__9FD776387995075645E2367D02C2628B\
Cleanup...
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6580__9FD776387995075645E2367D02C2628B.7z
Verified
Scan preloader...
Preloader:
EMI: MT6752 preloader_p32.bin with 5 memory type(s) supported
00: eMMC DDR3 ID: 700100454838454538 Ven: Kingston | Dev: EH8EE8 RAM: [ 1.00 GB ]
01: eMMC DDR3 ID: 150100464E36324D42 Ven: Samsung | Dev: FN62MB RAM: [ 1.00 GB ]
02: eMMC DDR3 ID: 150100464E58324D42 Ven: Samsung | Dev: FNX2MB RAM: [ 1.00 GB ]
03: eMMC DDR3 ID: 150100464536324D42 Ven: Samsung | Dev: FE62MB RAM: [ 1.00 GB ]
04: eMMC DDR3 ID: 150100464531324D42 Ven: Samsung | Dev: FE12MB RAM: [ 1.00 GB ]
Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_p32.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_p32.bin [4487c8fb]...
Exist
Done: 00:00:54
Operation: Reset Settings/Format FS [ v2.38c9 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: SMART RESET
Wait...
WARNING!
Format FS WILL RESET ALL USER DATA!
Make sure about correct format mode selection!
Continue?
Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
MODE: PRELOADER PORT; PORT: 4
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM: Init passed
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
BROM: Sec Level: 0x00000000 Mode: PLAIN
BROM: BROM|BL : 0xFF|0x01 [PRELOADER PORT]
AGENT: 0_base: base_v2216 | Manual: Off
[3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6580
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA: AGENT started
NAND: DEVICE NOT FOUND
eMMC: OK
eMMC: 460001154D32364E05820342394518D3
DAInf: v4.2.156
DA: DRAM ready
DA: BOOT to 2nd DA...
DA: Receiving HW info
EMMC:
CID: 150100464E36324D42038205D3184539
VEN: Samsung OEM: 0 ID: 464E36324D42 [FN62MB] PRV: 0x03
SNN: 2181419800 [0x8205D318] MF: 4/2018
BOOT1: 0x00400000 [ 4.00 MB ]
BOOT2: 0x00400000 [ 4.00 MB ]
RPMB: 0x00080000 [ 512.00 KB ]
USER: 0x1D2000000 [ 7.28 GB ]
SRAM 0x00020000 [ 128.00 KB ]
DRAM 0x40000000 [ 1.00 GB ]
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
RNID: 9FD776387995075645E2367D02C2628B
DA: STATUS: BLANK FLASH; BSTYLE: EMMC FLASH BOOT
DA: USB: HIGH-SPEED
Boot done [0]
Reading...
Ok
Reading...
Scan memory...
Found region: 15640 [12|15640|0]
Scan filesystem...
SmartInfo: AndroidVer: 8 UserDataFS: 0x03 CacheFS: 0x02
Strategy: 7
erify device config...
Ok
Loaders Ok
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6580__9FD776387995075645E2367D02C2628B
Process: RESET PROTECTION...
Format Ok: RESET PROTECTION
Process: USERDATA...
Format Ok: USERDATA
Process: CACHE...
Format Ok: CACHE
Process: USERDATA...
Format Ok: USERDATA
Done: 00:00:29
Reconnect Power/Cable now
Operation: Read Firmware [ v2.38c9 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Destination: C:\Users\sc\Desktop\
Free space: 63.09 Gb
Wait...
[+] Pack FW [Sparse]
[-] Forced Read
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
MODE: PRELOADER PORT; PORT: 4
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM: Init passed
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
BROM: Sec Level: 0x00000000 Mode: PLAIN
BROM: BROM|BL : 0xFF|0x01 [PRELOADER PORT]
AGENT: 0_base: base_v2216 | Manual: Off
[3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6580
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA: AGENT started
NAND: DEVICE NOT FOUND
eMMC: OK
eMMC: 460001154D32364E05820342394518D3
DAInf: v4.2.156
DA: DRAM ready
DA: BOOT to 2nd DA...
DA: Receiving HW info
EMMC:
CID: 150100464E36324D42038205D3184539
VEN: Samsung OEM: 0 ID: 464E36324D42 [FN62MB] PRV: 0x03
SNN: 2181419800 [0x8205D318] MF: 4/2018
BOOT1: 0x00400000 [ 4.00 MB ]
BOOT2: 0x00400000 [ 4.00 MB ]
RPMB: 0x00080000 [ 512.00 KB ]
USER: 0x1D2000000 [ 7.28 GB ]
SRAM 0x00020000 [ 128.00 KB ]
DRAM 0x40000000 [ 1.00 GB ]
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
RNID: 9FD776387995075645E2367D02C2628B
DA: STATUS: BLANK FLASH; BSTYLE: EMMC FLASH BOOT
DA: USB: HIGH-SPEED
Boot done [0]
Reading...
Ok
Reading...
Scan memory...
Found region: 15640 [12|15640|0]
Scan filesystem...
Patch Level: O11019
SW Version: P32-F8011-8.1-OP-V054-20200330
Ver. CodeName: REL
Ver. Release: 8.1.0
Sec. Patch: 2020-04-05
Build Time: 30.03.2020
Product Model: itel P32
Product Brand: Itel
Product Name: F8011
Product Device: itel-P32
CPU : armeabi-v7a,armeabi
Product Manfct: itel
Product Info: P32
SW : P32-user 8.1.0 O11019 1585556127 release-keys
Product Board: P32
Board Platform: mt6580
Display ID: P32-F8011-8.1-OP-V054-20200330
Startegy: 7
Firmware ID: MT6580_itel_itel_P32_8.1.0_P32-F8011-8.1-OP-V054-20200330_O11019_P32
Read: preloader.bin
Read: cm2pit.bin
Read: proinfo.img
Read: nvram.bin
Read: protect.img
Read: protect.img
Read: persist.img
ExtSparse: Compression ratio: 92%
Read: seccfg.img
Read: lk.bin
Read: lk.bin
Exist
Read: boot.img
Read: recovery.img
Read: para.img
Read: logo.bin
Read: odmdtbo.img
Read: expdb.img
Read: vendor.img
ExtSparse: Compression ratio: 13%
Read: frp.img
Read: tz.img
Read: tz.img
Exist
Read: nvdata.img
Read: metadata.img
Read: oemkeystore.img
Read: secro.img
Read: keystore.img
Read: system.img
ExtSparse: Compression ratio: 21%
Read: cache.img
Read: userdata.img
Read: flashinfo.img
Read: sgpt.img
FW Size: 1.38 GB
Android Info saved: _Android_info.txt
Scatter: MT6580_Android_scatter.txt
Saved: C:\Users\sc\Desktop\MT6580_itel_itel_P32_8.1.0_P32-F8011-8.1-OP-V054-20200330_O11019_P32\
Verify device config...
Ok
Loaders Ok
Verify firmware [MT6580_itel_itel_P32_8.1.0_P32-F8011-8.1-OP-V054-20200330_O11019_P32]...
Exist
Done: 00:06:29
MT6580_itel_itel_P32_8.1.0_P32-F8011-8.1-OP-V054-20200330_O11019_P32
এই ফাইল টি ১০০% কাজ করবে
আপনাদের প্রয়োজনে
আমাকে
এই নাম্বারে
ফোন করুন
01837078153
SPD6531DA_00400000_MOCOR_12C.W13.04.14_Release_12082021142426_6531__QMOBILE-Q30
CM2 READ INFOR :
==== Wait for phone...
Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Elapsed: 00:00:06
Reconnect Power/Cable!
Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Platform : MOCOR_12C.W13.04.14_Release
ExtInfo : D8_V3.0_SJ_H21_QMobile_3IN1_V01
Project : D399_PCB_V1.1_SJ15_GIVA_SW_V1.0
HWInfo : D399_PCB_V1.1_SJ15_GIVA_SW_V1.0
Compile : 12-08-2021 14:24:26
Set FileInfo :
Model Vendor : QMOBILE
Model Name : Q30
ExtInfo Data : 6531
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_MOCOR_12C.W13.04.14_Release_12082021142426_6531__QMOBILE-Q30.bin
Done!
Elapsed: 00:00:53
Reconnect Power/Cabl
FF126M02_C90_CQ_SYMPHONY_CQ1822S_BENGAL_V02_128X160_EN_BE_20200331_161739
CM2 READ INFORMATION:
Card found : 20721776 , v0154
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07
SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Identify [ v1.07 ]
BootMode : FLASH
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]
IMEI[1] : 35755944703-----
IMEI[2] : 35755944703-----
Done!
Elapsed: 00:01:16
Reconnect Power/Cable!
THA FLASH FILE 100% OK
NEED FORE CALL
01837078153
LAVA IRIS 505 MTK CPU 6572 100% OK FLASH FILE WITHOUT PASSWORD
CM2 DONGLE READ FILE
_Android_Info
_Android_Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : iris505
Device Model : iris505
Device CPU : MT6572
Device IntName : iris505
Device Version : 4.4.2
Device Compile : 7/5/2016 10:08:34 AM
Device Project : ALPS.KK1.MP7.V1
Device ExtInfo : iris505
MT6572__iris505__iris505__iris505__4.4.2__ALPS.KK1.MP7.V1
THA FILE IS 100% OK
NEED FORE CALL ME
CALL:01837078153
ITEL S11 MTK 6580 CPU 100% OK FLASH FILE WITHOUT PASSWORD
cm2 read information :
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Itel
Device Model : S11
Device CPU : MT6580
Device IntName : S11
Device Version : 6.0
Device Compile : 4/20/2018 9:43:52 AM
Device Project : S11-I801-6.0-OP-V070-180420
Device ExtInfo : itel S11
MT6580__Symphony__i10_plus__i10_plus__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P136
cm2 dongle read information :
Wait for phone...
Phone found! [ 81 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464536324D4203A2149AE345BD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM26E
[eMMC] : FLASH_CID : 150100464536324D4203A2149AE345BD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0x98112E6CAB0301ED2506D1DAB56993EC
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand : Symphony
ProdName : i10_plus
ProdModel : i10 plus
Device : i10_plus
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-n0.mp2-V1_tinno6580.we.n_P136
[Read Ok] : preloader_v3730.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / v3730 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2669 MiB
Scatter saved to : E:\100%\MT6580__Symphony__i10_plus__i10_plus__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P136\
All done!
Done!
Elapsed: 00:13:14
Reconnect Power/Cable!
MT6580__Symphony__i10_plus__i10_plus__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P136
i10_PLUS_HW1_V5_2
download link
i10_PLUS_HW1_V5
AG-TEL AG 11PROO SPD CPU 6531E FLASH FILE 100% OK PAID FILE info Device Connected! BootVersion : SPRD3 BootSource : InternalLibrary Boo...
